• Bricks - Class B Engineering
• Bricks - Standard Facing Bricks
• Concrete - General Purpose
• Concrete Blocks - Lightweight 3 to 7 Newton
• Concrete Blocks - Medium Density 7 to 12 Newton
• Concrete Blocks - Solid Density 12+ Newton
• Gritstone
• Limestone
• Sandstone - Abrasive
• Tiles - Ceramic
• York Stone

MACHINE SUITABILITY

• 125mm Wall Chasing machines
• Metabo MFE40

USAGE ADVICE:

• Make certain the blade is suitable for the material before cutting
• Always cut a straightline, do not attempt to change direction whilst cutting
• In harder materials, it is advisable to cut the channel in two stages, going half depth on the first pass, before completing the cut at full depth. This will greatly reduce the load on the machine
• Wall chasing creates a large amount go airborne dust. It is strongly advised that a dust extradition unit is used with a minimum specification of ‘M-Class’. This in addition to wearing the full and appropriate PPE.