Forge

This Forge classic Backplate Handle has a straight lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use.

They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill Ø2mm Pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

The Forge range of Gable Handles incorporates a traditional backplate style with a scroll handle. The sprung handles have a lasting finish. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 100,000 uses.

Supplied with screws and fitting instructions.

Product Dimensions:
Backplate: 170 x 42mm.
Handle: 55 x 93mm.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

The Forge range of Modular Handles incorporates a modern backplate style with a straight bar handle. The sprung handles have a lasting finish and are ideal for internal or external use. They have been tested for corrosion resistance and cycle tested beyond 100,000 uses.

Backplate Size: 184 x 40mm.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

The Forge range of Gable Handles incorporates a traditional backplate style with a scroll handle. The sprung handles have a lasting finish. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 100,000 uses.

Supplied with screws and fitting instructions.

Product Dimensions:
Backplate: 170 x 42mm.
Handle: 55 x 93mm.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill Ø2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

Forge zinc plated steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.