Decorating & Wood Care

Bahco Replaceable, two edged blades last many times longer than conventional scrapers. Smoothes and removes paint, glue, varnish and rust without the need for heat.

Blades have convex ground edges to reduce the risk of scratching surfaces and cut on both the pull or push strokes.

Blackfriar Wood Dye penetrates deep into wood to enrich the colour of bare timber. It can be used on new interior and exterior timber, plywood and chipboard. Plus you can also mix the dye colours to create your own individual shades.

Available in 9 attractive shades.

Application Method; Brush or Cloth.

Coverage: 30m²/L/Coat.
Touch Dry: 1-3 hours.
Recoatable: 24 hours.

Briwax Hard Wax Oil gives a clear satin finish that is hard wearing, water and stain resistANTEX and will dry to an attractive, durable, natural finish. It is suitable for use on internal woodwork subject to a high degree of wear.

Briwax Hard Wax Oil brings out the natural beauty of the wood and makes the wood colours become richer. It is easy to apply and maintain, leaving a finish to woodwork that is resistANTEX to wear, water and stains.

Cuprinol 5 Star Complete Wood Treatment (FP) is a clear water based wood treatment for the combined eradication of the two main enemies of timber, rot and insect attack. Drying time can vary from 2 to 5 days under average temperature and with good ventilation, but longer under less favourable conditions. 6 to 8 weeks before laying certain types of floor covering.

How to Apply:

Wherever possible dip timber in fluid for at least 3 minutes, Otherwise apply uniformly to wooden ends and joints with at least two coats. Apply the second coat after the previous coat has soaked in but before it is dry. Re-treat any surfaces cut after treatment.

After fully dry, glues, fillers and knotting can be used as normal. Bitumen, rubber and some plastic based materials may soften or swell on contact with fluid or solvent vapour.

Note: The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appeARALDITEnce is acceptable.

Cuprinol 5 Star Complete Wood Treatment (FP) is a clear water based wood treatment for the combined eradication of the two main enemies of timber, rot and insect attack. Drying time can vary from 2 to 5 days under average temperature and with good ventilation, but longer under less favourable conditions. 6 to 8 weeks before laying certain types of floor covering.

How to Apply:

Wherever possible dip timber in fluid for at least 3 minutes, Otherwise apply uniformly to wooden ends and joints with at least two coats. Apply the second coat after the previous coat has soaked in but before it is dry. Re-treat any surfaces cut after treatment.

After fully dry, glues, fillers and knotting can be used as normal. Bitumen, rubber and some plastic based materials may soften or swell on contact with fluid or solvent vapour.

Note: The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appeARALDITEnce is acceptable.