Biscuit jointing machine with 0-90 degree tilt base for slotting grooves in boards and timbers to accept flat biscuit dowels.
Six pre-set depth adjustment.
Precise adjustable rise and fall with measurement scales.
Supplied with six wing TCT blade,...
The DEWALT DW682K Biscuit Jointer uses a rack and pinion control, that provides precise vertical adjustment and fence alignment. With pre-set cutting depths for 0, 10 and 20 biscuit sizes and additional fine adjustment for ultimate accuracy. The mit...
The DEWALT DW682K Biscuit Jointer uses a rack and pinion control, that provides precise vertical adjustment and fence alignment. With pre-set cutting depths for 0, 10 and 20 biscuit sizes and additional fine adjustment for ultimate accuracy. The mit...
Mafell LNF 20 Biscuit Jointer 240v
Now with extra features... and all conveniently integrated in the MAFELL-MAX. Ideal for the biscuit jointing fanatics amongst you!
The tilt stop can be fixed with detents of 0°, 22.5°, 45°, and 67.5&...
Technical Specification
Battery Type Lithium-ion
Charging Time 22 min
Voltage 18 v
Blade Diameter 100 mm
Blade Thickness 4 mm
Hole Diameter 22 mm
Number of Teeth 6
No Load Speed 10000 rpm
Vibration K factor 1.5 m/sec²
...
342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensur...
342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing to suit biscuits available. The correct choice of bearing for the biscuit being used will ensur...
For biscuit jointing of timber, man-made fibre and particle board with the router.
The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.
A slightly longer cut than the length of the biscuit is r...
For biscuit jointing of timber, man-made fibre and particle board with the router.
The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.
A slightly longer cut than the length of the biscuit is r...
For biscuit jointing of timber, man-made fibre and particle board with the router.
The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.
A slightly longer cut than the length of the biscuit is r...
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.
A slightly longer cut than the length of the biscuit...
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.
A slightly longer cut than the length of the biscuit...
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.
A slightly longer cut than the length of the biscuit...
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.
The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.
A slightly longer cut than the length of the biscuit...
Hard wearing steel body complete with disposable tungsten carbide knives and scorers.
Suitable for producing grooves and slots in softwood, hardwood and man-made boards for biscuit jointing.
For use with most biscuit jointing machines.
Use wit...
Enables biscuit jointing with timber, man-made fibre 7 particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No.0, 10 & 20.
Dimensions:
D=29/64 inch
D=37.2 mm
C=4 mm
B=12.7 mm
Shank Diameter=1...
Enables biscuit jointing with timber, man-made fibre 7 particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No.0, 10 & 20.
Dimensions:
D=29/64 inch
D=37.2 mm
C=4 mm
B=12.7 mm
Shank Diameter=1...
Enables biscuit jointing with timber, man-made fibre 7 particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No.0, 10 & 20.
Dimensions:
D=29/64 inch
D=37.2 mm
C=4 mm
B=12.7 mm
Shank Diameter=1...