Britool

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

All Britool 3/8 inch square torque wrenches indicate with touch, sound and sight when the required torque is reached.

This Britool torque wrench range are distinguishable by a length independent mechanism, push through reversible mechanism and have a retractable adjustment mechanism which avoids accidental adjustment. The torque wrench complies with ISO 6789 and is supplied in sturdy plastic storage case.

The Britool 12-point 1/2 inch sockets are crafted in chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only.

ASME B 107-1, ISO 1174-1.

The 1/4 inch drive sockets (Length 25mm) have a bi-hex socket (12 point) end and are made from chrome vanadium steel with a high chrome finish.

The OGV profile allows for tightening torque to be applied to the sides rather than to the angles of the nut. These sockets are for manual use only.

ASME B 107-1, ISO 1174-1.

The Britool combination spanners (metric) are crafted in chrome vanadium steel and finished in high chrome.
The ring spanner end has a 12-point OGV® profile angled at 15° , maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis.

ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113.

The Britool combination spanners (metric) are crafted in chrome vanadium steel and finished in high chrome.
The ring spanner end has a 12-point OGV® profile angled at 15° , maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis.

ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113.