| Edma 0365 Maxi-Pro Roofer Pack|
Product Code: EDM0365
Slate and Tinsnip set. The slate cutter features an integral hole punch and will shape slate, eternit and everitand fibre-cement up to 7mm. Cutting length: 35mm (1 3/8) in. Cuts without any dust or crumbling. The compound action aviation snips have...
| Edma 310/1005 Mat Slate & Punch Cutter|
Product Code: EDM0310
Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in. Features: Replaceable blade and punch. Punch diameter: 3.2 mm (1/8in). Cutt...
| Edma 320/1005a Mat Coup Slate Cutter|
Product Code: EDM0320
Plier type roof slate tile cutter with spring loaded handles. Approx length: 300mm (12 in). Will cut slate up to 7mm (9/32 in) thick....
| Edma Baby Graf 16/20 Hog Ring Pliers|
Product Code: EDM0412
The Edma Baby Grafer 16/20 Hog Ring Pliers include a stop guide for a stronger hold on the hog ring. They have patented ergonomic handles with a stainless steel coiled spring that has an anti rust coating for increased usage over time. For use...
| Edma Double Tip Scribe|
Product Code: EDM1333
Double tipped scribe for marking and scoring wall and floor tiles. Also ideal for manmade roofing slates....
| Edma Ergotop - Multiprofil Metal Frame Pliers|
Product Code: EDM0619
Ergotop-multiprofil metal frame pliers for use in drywall installation. Max capacity 1mm + 1mm. Special application for right and left setting. Punch process. Universal stud crimping tool, able to work on both sides of the stud. No screws or anch...
| Edma Heavy-Duty Batten Lifter|
Product Code: EDM0332
Heavy-duty roof batten remover with up to 1 tonne resistance, with a soft-grip handle....
| Edma Ladder Clamp (Pair)|
Product Code: EDM1338
Clamping kit for safely securing ladders for transportation or storage....
| Edma Large Slate Guillotine Machine|
Product Code: EDM1330
Large slate guillotine which cuts up to 12mm (1/2in) thick natural slates in one easy action. Suitable for cutting natural slate only. Overall length: 840mm (33in).Weight: 8.1kg (18lb)....
| Edma Major Spring|
Product Code: EDM1015
Replacement spring for nibbler shears 0101, 0110, 0112 and 0113....
| Edma Master Profil Single Handed Setting Pliers|
Product Code: EDM0620
Master profil single handed setting pliers for use in drywall insulation. Maximum capacity 0.8mm + 0.8mm. Quick and efficient punching for the setting of studs and channels. Length 260mm (10 1/4 in). Weight 725g (26oz). Special features: single ...
| Edma Maxi Ret Swaging Tool 5 Blade|
Product Code: EDM0350
Designed for the progressive reduction of the pipe diameter. For stainless steel pipe up to 0.8 mm / 1/32in. Length: 265 mm.Weight: 554g. Special features:Ergonomic design with special soft-grip handles. Swaging up to 52 mm....
| Edma Monodex Nibbler Shears|
Product Code: EDM0101
Monodex Nibbler Shears are easier to use in many applications than conventional tinsnips. The upward cutting action of the blade cuts through mild steel up to 20 gauge and most non-ferrous metals up to 18 gauge thickness. Cuts without distorting the ...
| Edma Multicoup Extra Universal Cutting Tool|
Product Code: EDM0710
Mitre shears with variable angle cuts for use on decorative moulding, wooden skirting boards, rubber seals and PVC section. Length: 240mm. Weight: 422g. Special features: Ergonomic design with special soft-grip handles. Opening latch. Eliminates th...
| Edma Multicoup Plastic Tile Trim Finishing Cutter|
Product Code: EDM0700
Designed for cutting plastic sections, rubber glazing joints, decorative mouldings, tile trim and PVC tape. Cutting shears for standard corners and angles. 56 mm utility knife blade. Special features: cuts from 0° to 45° . Ergonomic design....
| Edma Pipe Cutting Tool Triocoup 3 Way 16/20/25|
Product Code: EDM0731
Cutting tool for 16/20/25 mm PVC and PER tubes. It cuts cleanly without warping due to the 3 rotating prestressing cutting slots. Length: 255 mm.Weight: 505g. Special features: 3-in-1 tool.Stainless steel blade.Auto-lock system.Ergonomic soft-grip ...
| Edma Pro Mat Coup Slate Guillotine Machine|
Product Code: EDM0330
Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench....
FH Promo Catalogue 2017
FH uPVC Windows & Doors