Home|     About Frank Howard     |Branches     |Delivery      |Returns & Refunds       |Help & FAQ Contact Us       |Your Orders           Login / Signup     
Frank Howard
Items: 0
Sub Total: £0.00

Total: £0.00
Braintree 01376 327 454
Bishop's Stortford 01279 506 016
Chelmsford 01245 207 007

Click here for delivery infomation including Power tool Accessories, Hand Tools and other Accessories Makita Power Tools, Bosch Power Tools, Festool Tools, Hand Tools & Accessories

Secured By Sagepay

Thawte Secured with SSL Encryption

Google Plus Facebook Twitter Instagram You Tube


Click For Bigger Image
£5.54 Inc. VAT
£4.62 Exc. VAT
✔ In Stock
Product Code: 103146
Standard Delivery - 1-3 Working Days or Less*
(*Subject to stock availability, Next Working Day option available on selected items at checkout)

Product Features & Specification

Mirobond is a high-quality neutral, elastical low modulus single component adhesive / sealant based on special silicone polymers.


  • Very easy to apply
  • Does not attack back coating of quality mirrors
  • Stays fully elastic after curing
  • Very good adhesion on many materials
  • Almost no smell


  • Bonding of mirrors onto most types of surfaces
  • Bonding of mirrors onto uneven surfaces
  • Sealing of joints in mirror walls

Directions for use

Method: caulking gun
Application temperature: +5°C to +35°C
Clean: with white spirit immediately after use
Finish: Soudal Joint Finish or Soapy water before skin formation
Repair: with the same material

Application Instructions:
  • Apply Mirobond with the enclosed triangular nozzles in vertical beads to the back of the mirror.
  • Depending on the dimension and weight of the mirrors, beads should be placed at equal distances between 10 to 20cm from each other.
  • Always apply a bead at each side edge of the mirror
  • See also “Remarks and Recommendations”
  • Due to the wide variety of types of mirrors, we strongly recommend preliminary compatibility tests.
  • During the curing process the mirrors need to be supported until the adhesive has fully cured. The time required depends on the weight/size of the mirror, the environmental situation (temperature, humidity) and the amount of product used.
  • In order to avoid possible problems, the mirror manufacturers as well as Soudal recommend sufficient ventilation at the back of the mirror. As a guideline, an opening of 3-4mm should be left between the surface and the mirror. This can be assured by the use of double sided mirror tape.
  • We also recommend this minimal ventilation opening of 3-4mm to ensure correct curing of the adhesive/sealant. Full surface bonding is on the risk of the applicator.
  • When mirrors with large dimensions are bonded, it’s highly recommended to use Mirobond in combination with high quality double sided mirror tape.
  • Mirrors that are fitted with a safety film at the back to avoid shattering must be pretreated with an adhesion promoter. SOUDAL SURFACE ACTIVATOR, when applied on this surface ensure the best bonding performance
    of Mirobond on this type of safety film. Without the use of SOUDAL SURFACE ACTIVATOR the adhesive bond might be insufficient with the risk of an unsafe situation.


Power Tool & Hand Tool Brands from Makita, Bosch, Festool, Dewalt, power tools essex, power tools braintree, power tools chelmsford

Events at Frank Howards

 FH Trade Essentials 2018

FH Trade Essentials 2018

FH uPVC Windows & Doors

uPVC Windows & Doors, plastics, accessories, batteries from Frank Howard's

Frank Howard Tools & Fixings Ltd
Unit 11 Lakes Industrial Park
Lower Chapel Hill, Braintree
Essex, CM7 3RU

We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta and Paypal.

© 2018 Frank Howard
Thursday 22nd February 2018

Powered By TABS For Tools