£5.71 Inc. VAT
£4.76 Exc. VAT
Product Code: 101444
|Standard Delivery - 1-3 Working Days or Less*|
(*Subject to stock availability, Next Working Day option available on selected items at checkout)
|Bulk Quantity Discounts|
|Qty||Discount||Unit Price (Ex VAT)||Unit Price (Inc VAT)|
Product Features & Specification
Fix ALL® High Tack White (Each)
Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on MS-Polymer®.
High initial tack reducing the need for initial support.
Fast curing, quick build-up of end strength, high sheer strength after full cure (no primer)
Easy to apply and easy to tool and finish
Remains elastic after curing
Does not contain isocyanates, silicones nor solvents
Paintable with all water based paints
Good colour stability, weather and UV resistance
Good adhesion on wet substrates
Directions for use
Minimal width: 2mm (bonding) 5mm (joints)
Maximal width: 10mm (bonding) 30mm (joints)
Minimum depth: 5mm (joints)
Recommendation: width of joint = 2x depth of joint
Method: Manual- or pneumatic caulking gun
Application temperature: +5°C until +35°C
Cleaning: Fix ALL Cleaner immediately after
application and before curing
Tooling: with soapy solution before skin formation
Repair with: Fix ALL High tack
Fix ALL High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase.
Fix ALL High Tack can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc… may differ from manufacturer to manufacturer, we recommend preliminary compatibility tests.
While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended.
This product can not be used as a glazing sealant.
Fix ALL High Tack can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix ALL High Tack can therefore only be used on the bottom of natural stone tiles.
When applying, make sure not to spill any sealant on the surface of