Home|     About Frank Howard     |Branches     |Delivery      |Returns & Refunds       |Help & FAQ Contact Us       |Your Orders           Login / Signup     
Frank Howard
Items: 0
Sub Total: 0.00

Total: 0.00
Braintree 01376 327 454
Bishop's Stortford 01279 506 016
Chelmsford 01245 207 007

Click here for delivery infomation including Power tool Accessories, Hand Tools and other Accessories Makita Power Tools, Bosch Power Tools, Festool Tools, Hand Tools & Accessories

Secured By Sagepay

Thawte Secured with SSL Encryption

The Real Deals! 2017

Google Plus Facebook Twitter Instagram You Tube


Straight Two Flute

Search in Straight Two Flute:  
Brands:
Sort By:
TREND 2/2X1/4HSS SINGLE FLUTE 3.2MM DIA X 8MM 257059
TREND 2/2X1/4HSS SINGLE FLUTE 3.2MM DIA X 8MM 257059
Product Code: 2/2X1/4HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
£5.75 EX VAT
TREND 2/2X1/4TC SINGLE FLUTE 3.2MM DIA X 8MM 253330
TREND 2/2X1/4TC SINGLE FLUTE 3.2MM DIA X 8MM 253330
Product Code: 2/2X1/4TC
Trend
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of c...
View Details
£15.25 EX VAT
TREND 3/01X1/2TC TWO FLUTE 4MM DIA X 11MM CUT
TREND 3/01X1/2TC TWO FLUTE 4MM DIA X 11MM CUT
Product Code: TRE3/01X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/32 inch D=4...
View Details
£11.84 EX VAT
TREND 3/01X1/4TC TWO FLUTE 4MM DIA X 11MM 257014
TREND 3/01X1/4TC TWO FLUTE 4MM DIA X 11MM 257014
Product Code: TRE3/01X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/32 inch D=4...
View Details
£12.20 EX VAT
TREND 3/01X8MMTC TWO FLUTE 4MM DIA X 11MM CUT
TREND 3/01X8MMTC TWO FLUTE 4MM DIA X 11MM CUT
Product Code: 3/01X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/32 inch D=4...
View Details
£12.20 EX VAT
TREND 3/02X1/4TC TWO FLUTE 6.3MM DIA X 19MM 257020
TREND 3/02X1/4TC TWO FLUTE 6.3MM DIA X 19MM 257020
Product Code: 3/02X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£13.36 EX VAT
TREND 3/03X1/4TC TWO FLUTE 4.5MM DIA X 11MM CUT
TREND 3/03X1/4TC TWO FLUTE 4.5MM DIA X 11MM CUT
Product Code: 3/03X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=4.5 mm C=11 m...
View Details
£13.01 EX VAT
TREND 3/04X1/4TC TWO FLUTE 2.5MM DIA X 8MM CUT
TREND 3/04X1/4TC TWO FLUTE 2.5MM DIA X 8MM CUT
Product Code: TRE3/04X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=2.5 mm C=8 mm ...
View Details
£12.20 EX VAT
TREND 3/05X1/4TC TWO FLUTE 3.0MM DIA X 11MM CUT
TREND 3/05X1/4TC TWO FLUTE 3.0MM DIA X 11MM CUT
Product Code: TRE3/05X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3 mm C=11 mm ...
View Details
£12.29 EX VAT
TREND 3/06X1/4TC TWO FLUTE 2MM DIA X 5MM CUT
TREND 3/06X1/4TC TWO FLUTE 2MM DIA X 5MM CUT
Product Code: 3/06X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/64 inch D=2...
View Details
£14.16 EX VAT
TREND 3/06X8MMTC TWO FLUTE 2MM DIA X 6.5MM CUT
TREND 3/06X8MMTC TWO FLUTE 2MM DIA X 6.5MM CUT
Product Code: 3/06X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/64 inch D=2...
View Details
£14.16 EX VAT
TREND 3/07X1/4TC TWO FLUTE 4.0MM DIA X 16MM CUT
TREND 3/07X1/4TC TWO FLUTE 4.0MM DIA X 16MM CUT
Product Code: 3/07X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/32 inch D=4...
View Details
£11.48 EX VAT
TREND 3/08X1/2TC TWO FLUTE 12.7MM DIA X 25MM 257046
TREND 3/08X1/2TC TWO FLUTE 12.7MM DIA X 25MM 257046
Product Code: TRE3/08X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/2 inch D=12...
View Details
£15.25 EX VAT
TREND 3/08X1/4TC TWO FLUTE 12.7MM DIA X 25MM 257032
TREND 3/08X1/4TC TWO FLUTE 12.7MM DIA X 25MM 257032
Product Code: TRE3/08X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/2 inch D=12...
View Details
£15.25 EX VAT
TREND 3/0X1/2TC TWO FLUTE 4.7MM DIA X 11MM CUT
TREND 3/0X1/2TC TWO FLUTE 4.7MM DIA X 11MM CUT
Product Code: 3/0X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3/16 inch D=4...
View Details
£12.20 EX VAT
TREND 3/0X1/4TC TWO FLUTE 4.7MM DIA X 11MM CUT
TREND 3/0X1/4TC TWO FLUTE 4.7MM DIA X 11MM CUT
Product Code: 3/0X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3/16 inch D=4...
View Details
£12.20 EX VAT
TREND 3/10X1/2TC TWO FLUTE 3.2MM DIA X 11MM CUT
TREND 3/10X1/2TC TWO FLUTE 3.2MM DIA X 11MM CUT
Product Code: 3/10X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/8 inch D=3....
View Details
£12.20 EX VAT
TREND 3/10X1/4TC TWO FLUTE 3.2MM DIA X 11MM CUT
TREND 3/10X1/4TC TWO FLUTE 3.2MM DIA X 11MM CUT
Product Code: TRE3/10X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/8 inch D=3....
View Details
£12.20 EX VAT
TREND 3/11X1/4TC TWO FLUTE 3.4MM DIA X 11MM CUT
TREND 3/11X1/4TC TWO FLUTE 3.4MM DIA X 11MM CUT
Product Code: 3/11X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3.4 mm C=11 m...
View Details
£11.48 EX VAT
TREND 3/12X1/4TC TWO FLUTE 6.3MM DIA X 11MM 257018
TREND 3/12X1/4TC TWO FLUTE 6.3MM DIA X 11MM 257018
Product Code: 3/12X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£11.84 EX VAT
TREND 3/13X1/4TC TWO FLUTE 5.5MM DIA X 19MM
TREND 3/13X1/4TC TWO FLUTE 5.5MM DIA X 19MM
Product Code: 3/13X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=7/32 inch D=5...
View Details
£14.89 EX VAT
TREND 3/1X1/4TC TWO FLUTE 5MM DIA X 16MM 257016
TREND 3/1X1/4TC TWO FLUTE 5MM DIA X 16MM 257016
Product Code: TRE3/1X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=13/64 inch D=...
View Details
£14.16 EX VAT
TREND 3/20X1/2TC TWO FLUTE 6.3MM DIA X 16MM CUT
TREND 3/20X1/2TC TWO FLUTE 6.3MM DIA X 16MM CUT
Product Code: 3/20X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£18.31 EX VAT
TREND 3/20X1/4HSS TWO FLUTE 6.3 DIA X 16MM 253303
TREND 3/20X1/4HSS TWO FLUTE 6.3 DIA X 16MM 253303
Product Code: 3/20X1/4HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
£7.64 EX VAT
TREND 3/20X1/4TC TWO FLUTE 6.3MM DIA X 16MM 257019
TREND 3/20X1/4TC TWO FLUTE 6.3MM DIA X 16MM 257019
Product Code: TRE3/20X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£13.01 EX VAT
TREND 3/20X3/8TC TWO FLUTE 6.3MM DIA X 16MM CUT
TREND 3/20X3/8TC TWO FLUTE 6.3MM DIA X 16MM CUT
Product Code: 3/20X3/8TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£16.41 EX VAT
TREND 3/21X1/4HSS TWO FLUTE 6.3 DIA X28MM 253306
TREND 3/21X1/4HSS TWO FLUTE 6.3 DIA X28MM 253306
Product Code: 3/21X1/4HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
£8.43 EX VAT
TREND 3/22X1/2TC TWO FLUTE 6.3MM DIA X 25MM CUT
TREND 3/22X1/2TC TWO FLUTE 6.3MM DIA X 25MM CUT
Product Code: TRE3/22X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£21.00 EX VAT
TREND 3/22X1/4TC TWO FLUTE 6.3MM DIA X 25MM 257021
TREND 3/22X1/4TC TWO FLUTE 6.3MM DIA X 25MM 257021
Product Code: TRE3/22X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£14.53 EX VAT
TREND 3/22X3/8TC TWO FLUTE 6.3MM DIA X 25MM CUT
TREND 3/22X3/8TC TWO FLUTE 6.3MM DIA X 25MM CUT
Product Code: 3/22X3/8TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/4 inch D=6....
View Details
£20.64 EX VAT
TREND 3/23X1/4TC TWO FLUTE 6.5MM DIA X 25MM CUT
TREND 3/23X1/4TC TWO FLUTE 6.5MM DIA X 25MM CUT
Product Code: 3/23X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=6.5 mm C=25 m...
View Details
£15.25 EX VAT
TREND 3/24X1/2TC TWO FLUTE 6MM DIA X 25MM CUT
TREND 3/24X1/2TC TWO FLUTE 6MM DIA X 25MM CUT
Product Code: 3/24X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D1=6 mm Cut len...
View Details
£20.49 EX VAT
TREND 3/24X1/4TC TWO FLUTE 6MM DIA X 25MM CUT
TREND 3/24X1/4TC TWO FLUTE 6MM DIA X 25MM CUT
Product Code: 3/24X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D1=6 mm Cut len...
View Details
£14.17 EX VAT
TREND 3/2X1/2TC TWO FLUTE 6MM DIA X 16MM CUT
TREND 3/2X1/2TC TWO FLUTE 6MM DIA X 16MM CUT
Product Code: TRE3/2X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/64 inch D=...
View Details
£16.79 EX VAT
TREND 3/2X1/4TC TWO FLUTE 6MM DIA X 16MM 253335
TREND 3/2X1/4TC TWO FLUTE 6MM DIA X 16MM 253335
Product Code: TRE3/2X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/64 inch D=...
View Details
£15.20 EX VAT
TREND 3/2X3/8TC TWO FLUTE 6MM DIA X 16MM CUT
TREND 3/2X3/8TC TWO FLUTE 6MM DIA X 16MM CUT
Product Code: 3/2X3/8TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/64 inch D=...
View Details
£16.79 EX VAT
TREND 3/2X8MMTC TWO FLUTE 6MM DIA X 16MM CUT
TREND 3/2X8MMTC TWO FLUTE 6MM DIA X 16MM CUT
Product Code: 3/2X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/64 inch D=...
View Details
£14.89 EX VAT
TREND 3/30X1/4TC TWO FLUTE 7.5MM DIA X 19MM
TREND 3/30X1/4TC TWO FLUTE 7.5MM DIA X 19MM
Product Code: 3/30X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=19/64 inch D=...
View Details
£14.89 EX VAT
TREND 3/31X1/2TC TWO FLUTE 7MM DIA X 25MM
TREND 3/31X1/2TC TWO FLUTE 7MM DIA X 25MM
Product Code: 3/31X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=9/32 inch D=7...
View Details
£14.89 EX VAT
TREND 3/41X1/2TC TWO FLUTE 8MM DIA X 25MM CUT
TREND 3/41X1/2TC TWO FLUTE 8MM DIA X 25MM CUT
Product Code: 3/41X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£17.23 EX VAT
TREND 3/41X1/4TC TWO FLUTE 8MM DIA X 25MM CUT
TREND 3/41X1/4TC TWO FLUTE 8MM DIA X 25MM CUT
Product Code: TRE3/41X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£16.79 EX VAT
TREND 3/42X1/4TC TWO FLUTE 7.9MM DIA X 26MM CUT
TREND 3/42X1/4TC TWO FLUTE 7.9MM DIA X 26MM CUT
Product Code: 3/42X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=7...
View Details
£14.89 EX VAT
TREND 3/42X8MMTC TWO FLUTE 7.9MM DIA X 26MM CUT
TREND 3/42X8MMTC TWO FLUTE 7.9MM DIA X 26MM CUT
Product Code: 3/42X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=7.9 mm C=25 m...
View Details
£14.89 EX VAT
TREND 3/43X1/4TC TWO FLUTE 8.0MM DIA X 26MM CUT
TREND 3/43X1/4TC TWO FLUTE 8.0MM DIA X 26MM CUT
Product Code: 3/43X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£14.89 EX VAT
TREND 3/43X8MMTC TWO FLUTE 8.0MM DIA X 26MM CUT
TREND 3/43X8MMTC TWO FLUTE 8.0MM DIA X 26MM CUT
Product Code: 3/43X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£14.89 EX VAT
TREND 3/44X1/4TC TWO FLUTE 8.1MM DIA X 26MM CUT
TREND 3/44X1/4TC TWO FLUTE 8.1MM DIA X 26MM CUT
Product Code: 3/44X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=8.1 mm C=25 m...
View Details
£14.89 EX VAT
TREND 3/44X8MMTC TWO FLUTE 8.1MM DIA X 26MM CUT
TREND 3/44X8MMTC TWO FLUTE 8.1MM DIA X 26MM CUT
Product Code: 3/44X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=8.1 mm C=25 m...
View Details
£14.89 EX VAT
TREND 3/45X1/4TC TWO FLUTE 8.9MM DIA X 26MM CUT
TREND 3/45X1/4TC TWO FLUTE 8.9MM DIA X 26MM CUT
Product Code: 3/45X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=8.9 mm C=25 m...
View Details
£14.89 EX VAT
TREND 3/45X8MMTC TWO FLUTE 8.9MM DIA X 26MM CUT
TREND 3/45X8MMTC TWO FLUTE 8.9MM DIA X 26MM CUT
Product Code: 3/45X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=8.9 mm C=25 m...
View Details
£14.89 EX VAT
TREND 3/4X1/2TC TWO FLUTE 8MM DIA X 19MM 257041
TREND 3/4X1/2TC TWO FLUTE 8MM DIA X 19MM 257041
Product Code: 3/4X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£16.41 EX VAT
TREND 3/4X1/4HSS TWO FLUTE 8MM DIA X 19MM 257024
TREND 3/4X1/4HSS TWO FLUTE 8MM DIA X 19MM 257024
Product Code: 3/4X1/4HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
Add to Basket
£8.80 EX VAT
TREND 3/4X1/4TC TWO FLUTE 8MM DIA X 19MM 253333
TREND 3/4X1/4TC TWO FLUTE 8MM DIA X 19MM 253333
Product Code: TRE3/4X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£14.89 EX VAT
TREND 3/4X3/8TC TWO FLUTE 8MM DIA X 19MM CUT
TREND 3/4X3/8TC TWO FLUTE 8MM DIA X 19MM CUT
Product Code: 3/4X3/8TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£14.53 EX VAT
TREND 3/4X8MMTC TWO FLUTE 8MM DIA X 19MM CUT
TREND 3/4X8MMTC TWO FLUTE 8MM DIA X 19MM CUT
Product Code: 3/4X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=5/16 inch D=8...
View Details
£14.89 EX VAT
TREND 3/50X1/2TC TWO FLUTE 9.5MM DIA X 25MM CUT
TREND 3/50X1/2TC TWO FLUTE 9.5MM DIA X 25MM CUT
Product Code: TRE3/50X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3/8 inch D=9....
View Details
£14.89 EX VAT
TREND 3/50X1/4TC TWO FLUTE 9.5MM DIA X 25MM 253337
TREND 3/50X1/4TC TWO FLUTE 9.5MM DIA X 25MM 253337
Product Code: TRE3/50X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3/8 inch D=9....
View Details
£16.05 EX VAT
TREND 3/50X3/8TC TWO FLUTE 9.5MM DIA X 25MM CUT
TREND 3/50X3/8TC TWO FLUTE 9.5MM DIA X 25MM CUT
Product Code: 3/50X3/8TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3/8 inch D=9....
View Details
£16.79 EX VAT
TREND 3/51X1/2TC TWO FLUTE 9.5MM DIA X 32MM 257042
TREND 3/51X1/2TC TWO FLUTE 9.5MM DIA X 32MM 257042
Product Code: TRE3/51X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3/8 inch D=9....
View Details
£18.31 EX VAT
TREND 3/51X1/4TC TWO FLUTE 9.5MM DIA X 32MM CUT
TREND 3/51X1/4TC TWO FLUTE 9.5MM DIA X 32MM CUT
Product Code: 3/51X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=3/8 inch D=9....
View Details
£18.31 EX VAT
TREND 3/52X1/2TC TWO FLUTE 9MM DIA X 25MM CUT
TREND 3/52X1/2TC TWO FLUTE 9MM DIA X 25MM CUT
Product Code: 3/52X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=9 mm C=25 mm ...
View Details
£14.88 EX VAT
TREND 3/5X1/2TC TWO FLUTE 9MM X19MM CUT
TREND 3/5X1/2TC TWO FLUTE 9MM X19MM CUT
Product Code: 3/5X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=23/64 inch D=...
View Details
£15.69 EX VAT
TREND 3/5X1/4TC TWO FLUTE 9MM DIA X 19MM 257027
TREND 3/5X1/4TC TWO FLUTE 9MM DIA X 19MM 257027
Product Code: 3/5X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=23/64 inch D=...
View Details
£14.89 EX VAT
TREND 3/5X3/8HSS TWO FLUTE 9MM DIA X 19MM CUT
TREND 3/5X3/8HSS TWO FLUTE 9MM DIA X 19MM CUT
Product Code: 3/5X3/8HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
£10.55 EX VAT
TREND 3/60X1/2TC TWO FLUTE 10MM DIA X 35MM 257044
TREND 3/60X1/2TC TWO FLUTE 10MM DIA X 35MM 257044
Product Code: TRE3/60X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£22.89 EX VAT
TREND 3/60X3/8HSS TWO FLUTE 10MM DIA X 35MM CUT
TREND 3/60X3/8HSS TWO FLUTE 10MM DIA X 35MM CUT
Product Code: 3/60X3/8HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
£17.08 EX VAT
TREND 3/61X1/2TC TWO FLUTE 10MM DIA X 25MM
TREND 3/61X1/2TC TWO FLUTE 10MM DIA X 25MM
Product Code: TRE3/61X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£14.89 EX VAT
TREND 3/61X1/4TC TWO FLUTE 10MM DIA X 25MM
TREND 3/61X1/4TC TWO FLUTE 10MM DIA X 25MM
Product Code: 3/61X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£14.89 EX VAT
TREND 3/62X1/2TC TWO FLUTE 10MM DIA X 30MM
TREND 3/62X1/2TC TWO FLUTE 10MM DIA X 30MM
Product Code: 3/62X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£19.85 EX VAT
TREND 3/6X1/2TC TWO FLUTE 10MM DIA X 19MM 257043
TREND 3/6X1/2TC TWO FLUTE 10MM DIA X 19MM 257043
Product Code: TRE3/6X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£15.25 EX VAT
TREND 3/6X1/4HSS TWO FLUTE 10MM DIA X 19MM 257028
TREND 3/6X1/4HSS TWO FLUTE 10MM DIA X 19MM 257028
Product Code: 3/6X1/4HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
Add to Basket
£9.08 EX VAT
TREND 3/6X1/4TC TWO FLUTE 10MM DIA X 19MM 257029
TREND 3/6X1/4TC TWO FLUTE 10MM DIA X 19MM    257029
Product Code: TRE3/6X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£15.25 EX VAT
TREND 3/6X3/8TC TWO FLUTE 10MM DIA X 19MM CUT
TREND 3/6X3/8TC TWO FLUTE 10MM DIA X 19MM CUT
Product Code: 3/6X3/8TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£15.25 EX VAT
TREND 3/6X8MMTC TWO FLUTE 10MM DIA X 19MM CUT
TREND 3/6X8MMTC TWO FLUTE 10MM DIA X 19MM CUT
Product Code: 3/6X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=25/64 inch D=...
View Details
£15.25 EX VAT
TREND 3/70LX3/8TC POCKET 11.1MM DIA X 25MM CUT
TREND 3/70LX3/8TC POCKET 11.1MM DIA X 25MM CUT
Product Code: 3/70LX3/8TC
Trend
A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut u...
View Details
£18.75 EX VAT
TREND 3/71X1/2TC TWO FLUTE 12MM DIA X 25MM CUT
TREND 3/71X1/2TC TWO FLUTE 12MM DIA X 25MM CUT
Product Code: 3/71X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£15.25 EX VAT
TREND 3/72X1/2TC TWO FLUTE 12MM DIA X 38MM CUT
TREND 3/72X1/2TC TWO FLUTE 12MM DIA X 38MM CUT
Product Code: 3/72X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£17.95 EX VAT
TREND 3/73DMX1/2TC TWO FLUTE 12MM DIA X 50MM CUT X84MM
TREND 3/73DMX1/2TC TWO FLUTE 12MM DIA X 50MM CUT X84MM
Product Code: 3/73DMX1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Short shank for Makita 3600B & ...
View Details
£23.11 EX VAT
TREND 3/73DX1/2TC TWO FLUTE 12MM DIA X 50MM CUT
TREND 3/73DX1/2TC TWO FLUTE 12MM DIA X 50MM CUT
Product Code: 3/73DX1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£23.69 EX VAT
TREND 3/73X1/2TC TWO FLUTE 12MM DIA X 50MM 257045
TREND 3/73X1/2TC TWO FLUTE 12MM DIA X 50MM 257045
Product Code: 3/73X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=15/32 inch D=12 mm C=50 mm OL=109 mm Shank Diameter=1/2 inch Please note: This cutter...
View Details
£21.80 EX VAT
TREND 3/73X12MMTC TWO FLUTE 12MM DIA X 50MM
TREND 3/73X12MMTC TWO FLUTE 12MM DIA X 50MM
Product Code: 3/73X12MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=15/32 inch D=12 mm C=50 mm OL=109 mm Shank Diameter=12 mm Please note: This cutter do...
View Details
£21.80 EX VAT
TREND 3/74X1/2TC TWO FLUTE 12MM DIA X 32MM CUT
TREND 3/74X1/2TC TWO FLUTE 12MM DIA X 32MM CUT
Product Code: 3/74X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£17.95 EX VAT
TREND 3/74X1/4TC TWO FLUTE 12MM DIA X 32MM CUT
TREND 3/74X1/4TC TWO FLUTE 12MM DIA X 32MM CUT
Product Code: 3/74X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£17.95 EX VAT
TREND 3/75MX1/2TC TWO FLUTE 12MM DIA X 63MM X 100 OL
TREND 3/75MX1/2TC TWO FLUTE 12MM DIA X 63MM X 100 OL
Product Code: 3/75MX1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Short shank for Makita 3600B ...
View Details
£25.95 EX VAT
TREND 3/75X1/2TC TWO FLUTE 12MM DIA X 63MM CUT
TREND 3/75X1/2TC TWO FLUTE 12MM DIA X 63MM CUT
Product Code: 3/75X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£24.84 EX VAT
TREND 3/76X1/4TC TWO FLUTE 12.55MM DIA X 25.MM CUT
TREND 3/76X1/4TC TWO FLUTE 12.55MM DIA X 25.MM CUT
Product Code: 3/76X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=31/64 inch D=...
View Details
£17.95 EX VAT
TREND 3/7X1/2TC TWO FLUTE 11MM DIA X 25MM CUT
TREND 3/7X1/2TC TWO FLUTE 11MM DIA X 25MM CUT
Product Code: 3/7X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=7/16 inch D=1...
View Details
£16.41 EX VAT
TREND 3/7X1/4TC TWO FLUTE 11MM DIA X 25MM 257030
TREND 3/7X1/4TC TWO FLUTE 11MM DIA X 25MM 257030
Product Code: 3/7X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=7/16 inch D=1...
View Details
£16.79 EX VAT
TREND 3/80X1/4TC TWO FLUTE 12.7MM DIA X 19MM 253338
TREND 3/80X1/4TC TWO FLUTE 12.7MM DIA X 19MM 253338
Product Code: TRE3/80X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/2 inch D=12...
View Details
£14.89 EX VAT
TREND 3/81DCX1/2TC TWO FLUTE 12.7MM DIAX32MM CLEARANCE
TREND 3/81DCX1/2TC TWO FLUTE 12.7MM DIAX32MM CLEARANCE
Product Code: 3/81DCX1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. TC tips are ground with greater...
View Details
£15.25 EX VAT
TREND 3/81X1/2HSS TWO FLUTE 12.7MM DIA X 32MM CUT
TREND 3/81X1/2HSS TWO FLUTE 12.7MM DIA X 32MM CUT
Product Code: 3/81X1/2HSS
Trend
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the...
View Details
£17.43 EX VAT
TREND 3/81X1/2TC TWO FLUTE 12.7MM DIA X 32MM 257047
TREND 3/81X1/2TC TWO FLUTE 12.7MM DIA X 32MM 257047
Product Code: TRE3/81X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/2 inch D=12...
View Details
£15.25 EX VAT
TREND 3/81X1/4TC TWO FLUTE 12.7MM DIA X 32MM CUT
TREND 3/81X1/4TC TWO FLUTE 12.7MM DIA X 32MM CUT
Product Code: TRE3/81X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/2 inch D=12...
View Details
£18.75 EX VAT
TREND 3/82X1/2TC TWO FLUTE 12.7MM DIA X 37MM 257048
TREND 3/82X1/2TC TWO FLUTE 12.7MM DIA X 37MM 257048
Product Code: TRE3/82X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=1/2 inch D=12...
View Details
£21.00 EX VAT
TREND 3/85X1/2TC TWO FLUTE 12.7MM DIA X 63MM CUT
TREND 3/85X1/2TC TWO FLUTE 12.7MM DIA X 63MM CUT
Product Code: TRE3/85X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops. Dimensions: D=1/2 inch D=12.7 mm C=63 mm OL=115 mm Shank Diameter...
View Details
£25.95 EX VAT
TREND 3/86CX1/2TC TWO FLUTE 12.7MM DIA X 75MM CUT
TREND 3/86CX1/2TC TWO FLUTE 12.7MM DIA X 75MM CUT
Product Code: 3/86CX1/2TC
Trend
Extra long two flute cutter for routing hollow honey-comb work top boards only. Use only in professional routers with an 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into the router base. TC tips are co...
View Details
£28.61 EX VAT
TREND 3/8LX1/4TC TWO FLUTE 12MM DIA X 19MM CUT
TREND 3/8LX1/4TC TWO FLUTE 12MM DIA X 19MM CUT
Product Code: TRE3/8LX1/4TC
Trend
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Suitable for Trend Hinge & Lock Jigs. Dimensi...
View Details
£16.64 EX VAT
TREND 3/8X1/2TC TWO FLUTE 12MM DIA X 19MM CUT
TREND 3/8X1/2TC TWO FLUTE 12MM DIA X 19MM CUT
Product Code: TRE3/8X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£16.64 EX VAT
TREND 3/8X1/4TC TWO FLUTE 12MM DIA X 19MM 253334
TREND 3/8X1/4TC TWO FLUTE 12MM DIA X 19MM 253334
Product Code: TRE3/8X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£16.64 EX VAT
TREND 3/8X8MMTC TWO FLUTE 12MM DIA X 19MM CUT
TREND 3/8X8MMTC TWO FLUTE 12MM DIA X 19MM CUT
Product Code: 3/8X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Dimensions: D=15/32 inch D=...
View Details
£16.41 EX VAT
TREND 3/9X1/4TC TWO FLUTE 13MM DIA X 20MM 257034
TREND 3/9X1/4TC TWO FLUTE 13MM DIA X 20MM 257034
Product Code: 3/9X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=33/64 inch D=13 mm C=20 mm OL=52 mm Shank Diameter=1/4 inch ...
View Details
£16.79 EX VAT
TREND 4/01X1/2TC TWO FLUTE 14MM DIA X 25MM CUT
TREND 4/01X1/2TC TWO FLUTE 14MM DIA X 25MM CUT
Product Code: 4/01X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=35/64 inch D=14 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch ...
View Details
£17.95 EX VAT
TREND 4/01X1/4TC TWO FLUTE 14MM DIA X 25MM CUT
TREND 4/01X1/4TC TWO FLUTE 14MM DIA X 25MM CUT
Product Code: 4/01X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=35/64 inch D=14 mm C=25 mm OL=56 mm Shank Diameter=1/4 inch ...
View Details
£17.95 EX VAT
TREND 4/02X1/2TC TWO FLUTE 14.3MM DIA X 25.4MM CUT
TREND 4/02X1/2TC TWO FLUTE 14.3MM DIA X 25.4MM CUT
Product Code: 4/02X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=9/16 inch D=14.3 mm C=25 mm OL=69 mm Shank Diameter=1/2 inch ...
View Details
£19.85 EX VAT
TREND 4/02X1/4TC TWO FLUTE 14.3MM DIA X 25.4MM CUT
TREND 4/02X1/4TC TWO FLUTE 14.3MM DIA X 25.4MM CUT
Product Code: 4/02X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=9/16 inch D=14.3 mm C=25 mm OL=58 mm Shank Diameter=1/4 inch ...
View Details
£19.85 EX VAT
TREND 4/03X1/2TC TWO FLUTE 14MM DIA X 50MM CUT
TREND 4/03X1/2TC TWO FLUTE 14MM DIA X 50MM CUT
Product Code: 4/03X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=35/64 inch D=14 mm C=50 mm OL=95 mm Shank Diameter=1/2 inch ...
View Details
£34.00 EX VAT
TREND 4/04X1/2TC TWO FLUTE 15MM DIA X 35MM
TREND 4/04X1/2TC TWO FLUTE 15MM DIA X 35MM
Product Code: 4/04X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=15 mm C=35 mm OL=76 mm Shank Diameter=1/2 inch Shank Diamete...
View Details
£26.08 EX VAT
TREND 4/05X1/4TC TWO FLUTE 14MM DIA X 20MM CUT
TREND 4/05X1/4TC TWO FLUTE 14MM DIA X 20MM CUT
Product Code: 4/05X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=9/16 inch D=14 mm C=20 mm OL=58 mm Shank Diameter=1/4 inch ...
View Details
£17.52 EX VAT
TREND 4/07X1/4TC TWO FLUTE 22.2MM DIA X 19MM 257039
TREND 4/07X1/4TC TWO FLUTE 22.2MM DIA X 19MM 257039
Product Code: 4/07X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=7/8 inch D=22.2 mm C=19 mm OL=51 mm Shank Diameter=1/4 inch ...
View Details
£19.85 EX VAT
TREND 4/08X1/2TC TWO FLUTE 25.4MM DIA X 19MM CUT
TREND 4/08X1/2TC TWO FLUTE 25.4MM DIA X 19MM CUT
Product Code: 4/08X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 inch D=25.4 mm C=19 mm OL=60 mm Shank Diameter=1/2 inch S...
View Details
£24.05 EX VAT
TREND 4/08X1/4TC TWO FLUTE 25.4MM DIA X 19MM 257040
TREND 4/08X1/4TC TWO FLUTE 25.4MM DIA X 19MM 257040
Product Code: 4/08X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 inch D=25.4 mm C=19 mm OL=51 mm Shank Diameter=1/4 inch S...
View Details
£24.05 EX VAT
TREND 4/0X1/2TC TWO FLUTE 13MM DIA X 26MM CUT
TREND 4/0X1/2TC TWO FLUTE 13MM DIA X 26MM CUT
Product Code: 4/0X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=33/64 inch D=13 mm C=26 mm OL=72 mm Shank Diameter=1/2 inch ...
View Details
£23.69 EX VAT
TREND 4/0X1/4TC TWO FLUTE 13MM DIA X 26MM CUT
TREND 4/0X1/4TC TWO FLUTE 13MM DIA X 26MM CUT
Product Code: 4/0X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=33/64 inch D=13 mm C=26 mm OL=57 mm Shank Diameter=1/4 inch ...
View Details
£23.69 EX VAT
TREND 4/10X1/2TC TWO FLUTE 35MM DIA X 25MM CUT
TREND 4/10X1/2TC TWO FLUTE 35MM DIA X 25MM CUT
Product Code: 4/10X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 3/8 inch D=35 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch ...
View Details
£38.93 EX VAT
TREND 4/12X1/2TC TWO FLUTE 38MM DIA X 25MM CUT
TREND 4/12X1/2TC TWO FLUTE 38MM DIA X 25MM CUT
Product Code: 4/12X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 1/2 inch D=38.1 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch ...
View Details
£45.05 EX VAT
TREND 4/15X1/2TC TWO FLUTE 50.8MM DIA X 25MM CUT
TREND 4/15X1/2TC TWO FLUTE 50.8MM DIA X 25MM CUT
Product Code: 4/15X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=2 inches D=50.8 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch ...
View Details
£49.63 EX VAT
TREND 4/1X1/2TC TWO FLUTE 15MM DIA X 25MM CUT
TREND 4/1X1/2TC TWO FLUTE 15MM DIA X 25MM CUT
Product Code: TRE4/1X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=19/32 inch D=15 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch ...
View Details
£26.08 EX VAT
TREND 4/1X1/4TC TWO FLUTE 15MM DIA X 25MM 257035
TREND 4/1X1/4TC TWO FLUTE 15MM DIA X 25MM 257035
Product Code: TRE4/1X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=19/32 inch D=15 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch ...
View Details
£26.08 EX VAT
TREND 4/1X8MMTC TWO FLUTE 15MM DIA X 25MM CUT
TREND 4/1X8MMTC TWO FLUTE 15MM DIA X 25MM CUT
Product Code: 4/1X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=19/32 inch D=15 mm C=25 mm OL=57 mm Shank Diameter=8 mm Sha...
View Details
£26.08 EX VAT
TREND 4/20X1/2TC TWO FLUTE 16MM DIA X 28MM 257050
TREND 4/20X1/2TC TWO FLUTE 16MM DIA X 28MM 257050
Product Code: TRE4/20X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=15.9 mm C=32 mm OL=74 mm Shank Diameter=1/2 inch ...
View Details
£20.28 EX VAT
TREND 4/21X1/2TC TWO FLUTE 16MM DIA X 37MM CUT
TREND 4/21X1/2TC TWO FLUTE 16MM DIA X 37MM CUT
Product Code: 4/21X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=15.9 mm C=37 mm OL=79 mm Shank Diameter=1/2 inch ...
View Details
£26.37 EX VAT
TREND 4/22X1/2TC TWO FLUTE 15.9MM DIA X50MM 257051
TREND 4/22X1/2TC TWO FLUTE 15.9MM DIA X50MM 257051
Product Code: 4/22X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=15.9 mm C=50 mm OL=96 mm Shank Diameter=1/2 inch ...
View Details
£28.99 EX VAT
TREND 4/24X1/2TC TWO FLUTE 16MM DIA X 63MM CUT
TREND 4/24X1/2TC TWO FLUTE 16MM DIA X 63MM CUT
Product Code: 4/24X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=15.9 mm C=63 mm OL=105 mm Shank Diameter=1/2 inch ...
View Details
£32.84 EX VAT
TREND 4/25X1/2TC TWO FLUTE 17MM DIA X 25MM CUT
TREND 4/25X1/2TC TWO FLUTE 17MM DIA X 25MM CUT
Product Code: 4/25X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=43/64 inch D=17 mm C=25 mm OL=65 mm Shank Diameter=1/2 inch ...
View Details
£22.52 EX VAT
TREND 4/25X1/4TC TWO FLUTE 17MM DIA X 25MM CUT
TREND 4/25X1/4TC TWO FLUTE 17MM DIA X 25MM CUT
Product Code: 4/25X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=43/64 inch D=17 mm C=25 mm OL=54 mm Shank Diameter=1/4 inch ...
View Details
£22.52 EX VAT
TREND 4/26X1/2TC TWO FLUTE 15.9MM DIA X 25MM CUT
TREND 4/26X1/2TC TWO FLUTE 15.9MM DIA X 25MM CUT
Product Code: 4/26X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=15.9 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch ...
View Details
£24.05 EX VAT
TREND 4/26X1/4TC TWO FLUTE 15.9MM DIA X 25.4MM
TREND 4/26X1/4TC TWO FLUTE 15.9MM DIA X 25.4MM
Product Code: 4/26X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip.s. Dimensions: D=5/8 inch D=15.9 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch ...
View Details
£24.05 EX VAT
TREND 4/27X1/2TC TWO FLUTE 16MM DIA X 25MM CUT
TREND 4/27X1/2TC TWO FLUTE 16MM DIA X 25MM CUT
Product Code: 4/27X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D1=16 mm Cut length=25 mm Overall length=67 mm Shank Diameter=1/2 ...
View Details
£23.47 EX VAT
TREND 4/28X1/2TC TWO FLUTE 16MM DIA X 35MM CUT
TREND 4/28X1/2TC TWO FLUTE 16MM DIA X 35MM CUT
Product Code: 4/28X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D1=16 mm Cut length=35 mm Overall length=67 mm Shank Diameter=1/2 ...
View Details
£21.97 EX VAT
TREND 4/29X1/2TC TWO FLUTE 18MM DIA X 25MM CUT
TREND 4/29X1/2TC TWO FLUTE 18MM DIA X 25MM CUT
Product Code: TRE4/29X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=45/64 inch D=18 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch S...
View Details
£22.89 EX VAT
TREND 4/29X1/4TC TWO FLUTE 18MM DIA X 25MM 257036
TREND 4/29X1/4TC TWO FLUTE 18MM DIA X 25MM 257036
Product Code: TRE4/29X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=45/64 inch D=18 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch ...
View Details
£22.89 EX VAT
TREND 4/2X1/2TC TWO FLUTE 16MM DIA X 19MM CUT
TREND 4/2X1/2TC TWO FLUTE 16MM DIA X 19MM CUT
Product Code: TRE4/2X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=16 mm C=19 mm OL=60 mm Shank Diameter=1/2 inch S...
View Details
£19.48 EX VAT
TREND 4/2X1/4TC TWO FLUTE 16MM DIA X 19MM 253339
TREND 4/2X1/4TC TWO FLUTE 16MM DIA X 19MM 253339
Product Code: 4/2X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=16 mm C=19 mm OL=52 mm Shank Diameter=1/4 inch S...
View Details
£16.41 EX VAT
TREND 4/2X8MMTC TWO FLUTE 16MM DIA X 19MM CUT
TREND 4/2X8MMTC TWO FLUTE 16MM DIA X 19MM CUT
Product Code: 4/2X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=5/8 inch D=16 mm C=19 mm OL=52 mm Shank Diameter=8 mm Shank...
View Details
£16.41 EX VAT
TREND 4/30X1/2TC TWO FLUTE 18MM DIA X 50MM 257052
TREND 4/30X1/2TC TWO FLUTE 18MM DIA X 50MM 257052
Product Code: 4/30X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=45/64 inch D=18 mm C=50 mm OL=92 mm Shank Diameter=1/2 inch ...
View Details
£32.04 EX VAT
TREND 4/40X1/2TC TWO FLUTE 18.2MM DIA X 32MM CUT
TREND 4/40X1/2TC TWO FLUTE 18.2MM DIA X 32MM CUT
Product Code: 4/40X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=23/32 inch D=18.2 mm C=32 mm OL=74 mm Shank Diameter=1/2 inch ...
View Details
£27.45 EX VAT
TREND 4/4X1/2TC TWO FLUTE 18.2MM DIA X 19MM CUT
TREND 4/4X1/2TC TWO FLUTE 18.2MM DIA X 19MM CUT
Product Code: 4/4X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=23/32 inch D=18.2 mm C=21 mm OL=62 mm Shank Diameter=1/2 inch ...
View Details
£20.64 EX VAT
TREND 4/4X1/4TC TWO FLUTE 18.2MM DIA X 21MM 257037
TREND 4/4X1/4TC TWO FLUTE 18.2MM DIA X 21MM 257037
Product Code: 4/4X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=23/32 inch D=18.2 mm C=21 mm OL=53 mm Shank Diameter=1/4 inch ...
View Details
£18.31 EX VAT
TREND 4/50X1/2TC TWO FLUTE 19MM DIA X 37MM CUT
TREND 4/50X1/2TC TWO FLUTE 19MM DIA X 37MM CUT
Product Code: TRE4/50X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=3/4 inch D=19.1 mm C=37 mm OL=79 mm Shank Diameter=1/2 inch ...
View Details
£26.75 EX VAT
TREND 4/51X1/2TC TWO FLUTE 19.1MM DIA X 50MM CUT
TREND 4/51X1/2TC TWO FLUTE 19.1MM DIA X 50MM CUT
Product Code: 4/51X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=3/4 inch D=19.1 mm C=50 mm OL=92 mm Shank Diameter=1/2 inch ...
View Details
£29.43 EX VAT
TREND 4/52X1/2TC TWO FLUTE 19.1MM DIA X 63MM CUT
TREND 4/52X1/2TC TWO FLUTE 19.1MM DIA X 63MM CUT
Product Code: 4/52X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=19.1 mm C=63 mm OL=105 mm Shank Diameter=1/2 inch Shank Diam...
View Details
£39.16 EX VAT
TREND 4/5X1/2TC TWO FLUTE 19MM DIA X 25MM 257053
TREND 4/5X1/2TC TWO FLUTE 19MM   DIA X 25MM 257053
Product Code: 4/5X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=3/4 inch D=19.1 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch ...
View Details
£22.16 EX VAT
TREND 4/5X1/4TC TWO FLUTE 19MM DIA X 25MM 253340
TREND 4/5X1/4TC TWO FLUTE 19MM DIA X 25MM 253340
Product Code: TRE4/5X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=3/4 inch D=19.1 mm C=25 mm OL=58 mm Shank Diameter=1/4 inch ...
View Details
£22.16 EX VAT
TREND 4/60X1/2TC TWO FLUTE 22MM DIA X 19MM CUT
TREND 4/60X1/2TC TWO FLUTE 22MM DIA X 19MM CUT
Product Code: TRE4/60X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=55/64 inch D=22 mm C=19 mm OL=57 mm Shank Diameter=1/2 inch ...
View Details
£18.31 EX VAT
TREND 4/60X1/4TC TWO FLUTE 22MM DIA X 19MM CUT
TREND 4/60X1/4TC TWO FLUTE 22MM DIA X 19MM CUT
Product Code: 4/60X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=55/64 inch D=22 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch ...
View Details
£18.31 EX VAT
TREND 4/60X8MMTC TWO FLUTE 22MM DIA X 19MM CUT
TREND 4/60X8MMTC TWO FLUTE 22MM DIA X 19MM CUT
Product Code: 4/60X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=55/64 inch D=22 mm C=19 mm OL=50 mm Shank Diameter=8 mm Sha...
View Details
£18.31 EX VAT
TREND 4/62X1/2TC TWO FLUTE 21MM DIA X 19MM CUT
TREND 4/62X1/2TC TWO FLUTE 21MM DIA X 19MM CUT
Product Code: 4/62X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=53/64 inch D=21 mm C=19 mm OL=59 mm Shank Diameter=1/2 inch ...
View Details
£25.95 EX VAT
TREND 4/62X1/4TC TWO FLUTE 21MM DIA X 19MM CUT
TREND 4/62X1/4TC TWO FLUTE 21MM DIA X 19MM CUT
Product Code: 4/62X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=53/64 inch D=21 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch ...
View Details
£25.95 EX VAT
TREND 4/63X1/4TC TWO FLUTE 20MM DIA X 20MM CUT
TREND 4/63X1/4TC TWO FLUTE 20MM DIA X 20MM CUT
Product Code: 4/63X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=25/32 inch D=20 mm C=20 mm OL=53 mm Shank Diameter=1/4 inch ...
View Details
£24.24 EX VAT
TREND 4/66X1/2TC TWO FLUTE 22MM DIA X 25MM CUT
TREND 4/66X1/2TC TWO FLUTE 22MM DIA X 25MM CUT
Product Code: 4/66X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=22 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch Shank Diamete...
View Details
£20.63 EX VAT
TREND 4/6X1/2TC TWO FLUTE 20MM DIA X 25MM 257054
TREND 4/6X1/2TC TWO FLUTE 20MM DIA X 25MM 257054
Product Code: TRE4/6X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=25/32 inch D=20 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch ...
View Details
£24.84 EX VAT
TREND 4/6X1/4TC TWO FLUTE 20MM DIA X 25MM 257038
TREND 4/6X1/4TC TWO FLUTE 20MM DIA X 25MM 257038
Product Code: TRE4/6X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=25/32 inch D=20 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch ...
View Details
£24.84 EX VAT
TREND 4/70X1/2TC TWO FLUTE 25 MM DIA X 25MM CUT
TREND 4/70X1/2TC TWO FLUTE 25  MM DIA X 25MM CUT
Product Code: 4/70X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=63/64 inch D=25 mm C=25 mm OL=65 mm Shank Diameter=1/2 inch ...
View Details
£25.57 EX VAT
TREND 4/70X1/4TC TWO FLUTE 25MM DIA X 25MM CUT
TREND 4/70X1/4TC TWO FLUTE 25MM DIA X 25MM CUT
Product Code: 4/70X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=63/64 inch D=25 mm C=25 mm OL=56 mm Shank Diameter=1/4 inch ...
View Details
£25.57 EX VAT
TREND 4/70X8MMTC TWO FLUTE 25MM DIA X 25MM CUT
TREND 4/70X8MMTC TWO FLUTE 25MM DIA X 25MM CUT
Product Code: 4/70X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=63/64 inch D=25 mm C=25 mm OL=56 mm Shank Diameter=8 mm Sha...
View Details
£25.57 EX VAT
TREND 4/71X1/2TC TWO FLUTE 23MM DIA X 19MM CUT
TREND 4/71X1/2TC TWO FLUTE 23MM DIA X 19MM CUT
Product Code: 4/71X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=29/32 inch D=23 mm C=19 mm OL=57 mm Shank Diameter=1/2 inch ...
View Details
£25.21 EX VAT
TREND 4/71X1/4TC TWO FLUTE 23MM DIA X 19MM CUT
TREND 4/71X1/4TC TWO FLUTE 23MM DIA X 19MM CUT
Product Code: 4/71X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=29/32 inch D=23 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch ...
View Details
£25.21 EX VAT
TREND 4/72X1/2TC TWO FLUTE 24MM DIA X 19MM CUT
TREND 4/72X1/2TC TWO FLUTE 24MM DIA X 19MM CUT
Product Code: 4/72X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=61/64 inch D=24 mm C=19 mm OL=59 mm Shank Diameter=1/2 inch ...
View Details
£25.95 EX VAT
TREND 4/72X1/4TC TWO FLUTE 24MM DIA X 19MM CUT
TREND 4/72X1/4TC TWO FLUTE 24MM DIA X 19MM CUT
Product Code: 4/72X1/4TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=61/64 inch D=24 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch ...
View Details
£25.95 EX VAT
TREND 4/72X8MMTC TWO FLUTE 24MM DIA X 19MM CUT
TREND 4/72X8MMTC TWO FLUTE 24MM DIA X 19MM CUT
Product Code: 4/72X8MMTC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=61/64 inch D=24 mm C=19 mm OL=50 mm Shank Diameter=8 mm Sha...
View Details
£25.95 EX VAT
TREND 4/7X1/2TC TWO FLUTE 22.2MM DIA X 31MM 257055
TREND 4/7X1/2TC TWO FLUTE 22.2MM DIA X 31MM 257055
Product Code: 4/7X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=7/8 inch D=22.2 mm C=31 mm OL=73 mm Shank Diameter=1/2 inch ...
View Details
£25.95 EX VAT
TREND 4/80X1/2TC TWO FLUTE 25.4MM DIA X 37MM CUT
TREND 4/80X1/2TC TWO FLUTE 25.4MM DIA X 37MM CUT
Product Code: 4/80X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 inch D=25.4 mm C=37 mm OL=79 mm Shank Diameter=1/2 inch S...
View Details
£32.84 EX VAT
TREND 4/82X1/2TC TWO FLUTE 26MM DIA X 25MM CUT
TREND 4/82X1/2TC TWO FLUTE 26MM DIA X 25MM CUT
Product Code: 4/82X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 1/32 inch D=26 mm C=25 mm OL=65 mm Shank Diameter=1/2 inch ...
View Details
£33.21 EX VAT
TREND 4/83X1/2TC TWO FLUTE 27MM DIA X 32MM CUT
TREND 4/83X1/2TC TWO FLUTE 27MM DIA X 32MM CUT
Product Code: 4/83X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 1/16 inch D=27 mm C=32 mm OL=72 mm Shank Diameter=1/2 inch ...
View Details
£34.72 EX VAT
TREND 4/85X1/2TC TWO FLUTE 28MM DIA X 25MM CUT
TREND 4/85X1/2TC TWO FLUTE 28MM DIA X 25MM CUT
Product Code: 4/85X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 7/64 inch D=28 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch ...
View Details
£36.25 EX VAT
TREND 4/8X1/2TC TWO FLUTE 25.4MM DIA X 25MM 257056
TREND 4/8X1/2TC TWO FLUTE 25.4MM DIA X 25MM 257056
Product Code: 4/8X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 inch D=25.4 mm C=25 mm OL=68 mm Shank Diameter=1/2 inch S...
View Details
£26.37 EX VAT
TREND 4/8X3/8TC TWO FLUTE 25.4MM DIA X 25MM CUT
TREND 4/8X3/8TC TWO FLUTE 25.4MM DIA X 25MM CUT
Product Code: 4/8X3/8TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 inch D=25.4 mm C=25 mm OL=61 mm Shank Diameter=3/8 inch S...
View Details
£25.57 EX VAT
TREND 4/90X1/2TC TWO FLUTE 31.7MM DIA X 25MM CUT
TREND 4/90X1/2TC TWO FLUTE 31.7MM DIA X 25MM CUT
Product Code: 4/90X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 1/4 inch D=31.8 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch ...
View Details
£37.05 EX VAT
TREND 4/91X1/2TC TWO FLUTE 30MM DIA X 25MM CUT
TREND 4/91X1/2TC TWO FLUTE 30MM DIA X 25MM CUT
Product Code: 4/91X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 3/16 inch D=30 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch ...
View Details
£37.05 EX VAT
TREND 4/92X1/2TC TWO FLUTE 40MM DIA X 25MM CUT
TREND 4/92X1/2TC TWO FLUTE 40MM DIA X 25MM CUT
Product Code: 4/92X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 37/64 inch D=40 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch ...
View Details
£47.73 EX VAT
TREND 4/93X1/2TC TWO FLUTE 41.3MM DIA X 25MM CUT
TREND 4/93X1/2TC TWO FLUTE 41.3MM DIA X 25MM CUT
Product Code: 4/93X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 5/8 inch D=41.3 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch ...
View Details
£42.72 EX VAT
TREND 4/94X1/2TC TWO FLUTE 44.5MM DIA X 32MM CUT
TREND 4/94X1/2TC TWO FLUTE 44.5MM DIA X 32MM CUT
Product Code: 4/94X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 3/4 inch D=44.5 mm C=32 mm OL=73 mm Shank Diameter=1/2 inch ...
View Details
£48.47 EX VAT
TREND 4/95X1/2TC TWO FLUTE 47.6MM DIA X 32MM CUT
TREND 4/95X1/2TC TWO FLUTE 47.6MM DIA X 32MM CUT
Product Code: 4/95X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 7/8 inch D=47.6 mm C=32 mm OL=73 mm Shank Diameter=1/2 inch ...
View Details
£49.63 EX VAT
TREND 4/96X1/2TC TWO FLUTE 50MM DIA X 25MM CUT
TREND 4/96X1/2TC TWO FLUTE 50MM DIA X 25MM CUT
Product Code: 4/96X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 31/32 inch D=50 mm C=25 mm OL=63 mm Shank Diameter=1/2 inch ...
View Details
£48.47 EX VAT
TREND 4/9X1/2TC TWO FLUTE 28.5MM DIA X 25MM CUT
TREND 4/9X1/2TC TWO FLUTE 28.5MM DIA X 25MM CUT
Product Code: 4/9X1/2TC
Trend
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. Dimensions: D=1 1/8 inch D=28.5 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch ...
View Details
£36.25 EX VAT
TREND S3/12X1/4STC TWO FLUTE 6.3MM DIA X 11MM CUT
TREND S3/12X1/4STC TWO FLUTE 6.3MM DIA X 11MM CUT
Product Code: S3/12X1/4STC
Trend
Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=11 mm OL=51 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/4 Diameter Metric: 6.3 Cut Length M...
View Details
£28.48 EX VAT
TREND S3/21X1/4STC TWO FLUTE 6.3MM DIA X 28MM CUT
TREND S3/21X1/4STC TWO FLUTE 6.3MM DIA X 28MM CUT
Product Code: S3/21X1/4STC
Trend
Greater durability. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=28 mm OL=63 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/4 Diameter Metric: 6.3 Cut Length M...
View Details
£33.91 EX VAT
TREND S3/22X1/4STC TWO FLUTE 6.3MM DIA X 25MM 253336
TREND S3/22X1/4STC TWO FLUTE 6.3MM DIA X 25MM 253336
Product Code: S3/22X1/4STC
Trend
Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=25 mm OL=50 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/4 Diameter Metric: 6.3 Cut Length...
View Details
£28.48 EX VAT
TREND S3/50X3/8STC TWO FLUTE 9.5MM DIA X 25MM CUT
TREND S3/50X3/8STC TWO FLUTE 9.5MM DIA X 25MM CUT
Product Code: S3/50X3/8STC
Trend
Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=3/8 inch D=9.5 mm C=25 mm OL=63 mm Shank Diameter=3/8 inch Shank Diameter: 3/8 Diameter Imperial: 3/8 Diameter Metric: 9.5 Cut Length M...
View Details
£50.52 EX VAT
TREND S3/81X1/2STC TWO FLUTE 12.7MM DIA X 32MM CUT
TREND S3/81X1/2STC TWO FLUTE 12.7MM DIA X 32MM CUT
Product Code: S3/81X1/2STC
Trend
Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/2 inch D=12.7 mm C=32 mm OL=77 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperial: 1/2 Diameter Metric: 12.7 Cut Length...
View Details
£73.01 EX VAT

 

Power Tool & Hand Tool Brands from Makita, Bosch, Festool, Dewalt, power tools essex, power tools braintree, power tools chelmsford


Events at Frank Howards

 FH Autumn/Winter Deals 2017

FH Autumn/Winter Deals 2017

FH uPVC Windows & Doors

uPVC Windows & Doors, plastics, accessories, batteries from Frank Howard's









Frank Howard Tools & Fixings Ltd
Unit 11 Lakes Industrial Park
Lower Chapel Hill, Braintree
Essex, CM7 3RU

We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Delta and Paypal.

2017 Frank Howard
Wednesday 22nd November 2017


Powered By TABS For Tools